Adjustment Procedure - Planmeca ProMax Technical Manual

Chapter E - C-ARM AND IMAGING ARM

2.1 Adjustment procedure

NOTE Some steps are described in Planmeca Device tool manual, publication number
10031558.
PANORAMIC BEAM AND PATIENT POSITIONING MECHANISM ADJUSTMENT
E-6 Planmeca ProMax
PANORAMIC BEAM AND PATIENT POSITIONING MECHANISM
Checking the panoramic beam position
Adjusting the sensor head angle
Primary collimator angle adjustment
Panoramic beam adjustment
Patient positioning mechanism adjustment
Calibration of angle sensors
Beam check
Taking a ball phantom exposure
Panoramic mode patient positioning lights
Adjustment of tomo mode patient positioning lights
Calibrating panoramic sensor head
ADJUSTMENT
Technical Manual