Removing The Print Drum, Master Making U Release Button, Lock Solenoid, And Safety Switch - Riso RZ9 Series Technical Manual

2. Removing the Print Drum, Master Making U Release Button, Lock Solenoid, and Safety Switch

(1) Detach the front cover.
(2) Pull out the master making unit and switch off the machine power.
(3) Detach the safety SW cover by removing a screw (M4x8: 1pc).
(4) Unplug connectors (3 locations), remove screws (M4x8: 3pcs) and detach the master making U lock unit.
Removing the print drum release button and master making U release button
(5) Undo two hooks on each button from the master making U lock unit and remove the buttons.
Removing the master making U lock solenoid
(5) Remove screws (M3x6: 2pcs) and detach the master making U lock solenoid.
Master making U release button
DANKA AUSTRALIA PTY. LTD.
Master making U lock solenoid
[ 15 - 9 ] - Rev. 0.2
CHAPTER 15: MASTER MAKING SECTION
Master making U lock unit
1515
1516
Print drum release button
RZ9 Series