Removing The Paper Sensor - Riso RZ9 Series Technical Manual

CHAPTER 6: SECOND PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.

2. Removing the Paper Sensor

[ Paper Sensor (Receive) ]
(1) Remove the print drum out from the machine and turn OFF the machine power.
(2) Remove the guide roller.
(3) Remove screws ( M3x8: 2 pcs), and unplug the connector to detach the paper guide plate (upper).
(4) From the detached paper guide plate (upper), remove the multiple paper feed sensor shield plate (M3x6
screw; 1 pc).
(5) Detach the paper sensor (receive) from the paper guide plate (upper) by removing screws (M3x8; 2 pcs).
0611
Multiple paper feed sensor shield Paper sensor (receive)
< Paper guide plate (upper) > 0612
[ 6 - 9 ] - Rev. 0.2
RZ9 Series