Advertisement
(4) Unplug the connector of the print positioning pulse motor.
(5) Unplug the connector of the vertical centering sensor, and unhook the reusable band.
(6) Remove screws ( M4x8: 4pcs) of the paper feed drive unit.
(7) Unhook the paper feed drive unit from the machine while rotating the G-lever assembly to the right by hand,
making a way for the unit to come out, remove the unit from the machine.
- Precausion on assembly continues on next page -
CHAPTER 6: SECOND PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.
Hook on vertical base bracket
G-lever assembly
[ 6 - 17 ] - Rev. 0.2
Vertical pulse motor
Paper feed drive unit
Vertical centering sensor
Reusable band
0628
RZ9 Series
Advertisement
Chapters
