Removing The Master End Sensor (Receive) Assembly - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 15: MASTER MAKING SECTION

DANKA AUSTRALIA PTY. LTD.

5. Removing the Master End Sensor (receive) Assembly

(1) Pull out the master making unit and switch off the machine power.

(2) Open the master making unit upper cover.

(3) Remove a screw (M3x6: 1pc), unplug the sensor connector and detach the master end sensor (receive)

Master End sensor (receive) assembly

Master End sensor (receive) assembly

< Master End Sensor (receive) Assembly >

[ 15 - 15 ] - Rev. 0.2