Removing Paper Volume Sensors A And B - Riso RZ9 Series Technical Manual

CHAPTER 4: FIRST PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.

9. Removing Paper Volume Sensors A and B

(1) Switch off power, remove the rear cover, and open the SH PCB bracket.
(2) Unplug the connector and dismount paper volume sensors A and B from the paper feed relay PCB bracket.
0452
Paper feed relay PCB bracket
Paper volume sensor B
Paper volume sensor A
0453
[ 4 - 27 ] - Rev. 0.2
RZ9 Series