Removing The Write Roller - Riso RZ9 Series Technical Manual

9. Removing the Write Roller

(1) Pull out the master making unit and switch off the machine power.
(2) Open the master making unit upper cover and remove following items.
- Master roll
- master making cover front
- Write pulse motor assembly
- Master guide gate (excluding A3/Ledger machines)
(3) Detach the write roller pulley by removing a screw (M3x8: 1pc).
(4) Detach the bearing support bracket (front) by removing screws (M3x6: 2pcs).
(5) Pull out the write roller through the hole on the side frame.
DANKA AUSTRALIA PTY. LTD.
Pulley Bearing support bracket (front)
[ 15 - 21 ] - Rev. 0.2
CHAPTER 15: MASTER MAKING SECTION
< Write roller >
Write roller
1545
1546
RZ9 Series