Advertisement
CHAPTER 14: Duplex AF Unit
Mechanism
1. Basic Mechanism
Two or more sheets of original can be set on the Original Table. The Original Table has a original size detection
mechanism.
The original on the original table is feeded to the scanning area through the Pick-up roller, Paper feed belt,and
the 1st transport roller.
In one side scanning, the original which scanning of one side finished is transported to the Exit table through
the 2nd transport roller and Exit roller.
In double-sided scanning, the original is further transported to the reverse table through the reverse roller.
In double-sided scanning , the original once transported to the reverse table side is again leaded into the
scanning area through the reverse roller, exit roller , and 1st transport roller.
The original which scanning of the reverse side finished performs reverse operation once again, and is
transported to the exit table through the 2nd transported roller and exit roller.
Pick-Up Roller
Paper Feed Belt
1st Transport
Roller
Scanning Area
DANKA AUSTRALIA PTY. LTD.
Exit Roller
2nd Transport
Roller
[ 14 - 2 ] - Rev. 0.2
Reverse Roller
Reverse Table
Junction Gate
Original
Table
1401
Exit Table
RZ9 Series
Advertisement
Chapters
