Removing The Flange-R - Riso RZ9 Series Technical Manual

CHAPTER 9: PRINT DRUM SECTION

12. Removing the Flange-R

(1) Make a confidential master on the print drum and pull out the drum from the machine.
(2) Remove the following components.
- Screen assembly
- Master clamp base assembly
- Drum body
- Drum side frames (2pcs)
- Drum rear frame assembly
- Drum joint
(3) Remove the C-ring and detach the flange-R.
Flange-R
DANKA AUSTRALIA PTY. LTD.
[ 9 - 22 ] - Rev. 0.2
0950
C-ring
0951
RZ9 Series