Print Drum Set Mechanism - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 9: PRINT DRUM SECTION

DANKA AUSTRALIA PTY. LTD.

2. Print Drum Set Mechanism

The removal and insertion of the print drum is done at print drum position-B stop position. Whether the print

drum is set in the machine or not is checked by the drawer connector of the print drum, print drum safety SW

and print drum lock sensor.

When the print drum safety SW is OFF following motors will not go ON.

The main motor, clamp motor, master removal vertical transport motor, master compression motor, print drum

horizontal pulse motor, separation fan, and separation pump solenoid.

Drawer connector

Print drum lock sensor

Print drum safety SW

[ 9 - 3 ] - Rev. 0.2