Vertical Transfer Unit - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

8. Vertical Transfer Unit

(1) Detach jam release lever and remove the Front cover.

(2) Detach the release handle together with the shaft (M4x8 screw; 1 pc).

(3) Detach the jam release lever shaft and shaft-stay (M4x8 screw; 1 pc).

Release handle

(4) Detach the guide plate (lower) by following procedure.

1) Detach pickup roller assembly.

2) Detach stripper unit.

3) Detach elevator support beam by removing screws (M4x8; 2 pcs).

4) Detach guide plate (lower) by removing screws (M4x8; 8 pcs).

(5) Remove rear cover and open the SH-PCB bracket.

Elevator support beam

CHAPTER 5: MULTI-TRAY PAPER FEED SECTION

DANKA AUSTRALIA PTY. LTD.

Guide plate (lower)

[ 5 - 21 ] - Rev. 0.2

Jam release lever shaft & shaft-stay