Advertisement
FL Tray - 2 Regist Loop Amount
Description
3943
Setting
Multi-Feed Tray Selection
Description
3946
Setting
Multi-Feed Tray-1 Feed ON Timing Adjustment
Description
3949
Setting
Multi-Feed Tray-2 Feed ON Timing Adjustment
Description
3950
Setting
Multi-Tray Assist 1 ON Timing
Description
3951
Setting
Multi-Tray Assist Speed 1 Adj.
Description
3955
Setting
Multi-Tray Assist Speed 2 Adj.
Description
3956
Setting
Multi-Tray Assist Speed 3 Adj.
Description
3957
Setting
Multi-Tray Assist Speed 4 Adj.
Description
3958
Setting
Multi-Tray Assist Speed 5 Adj.
Description
3959
Setting
Joint Paper Separation Sensor ON/OFF
3960
Description
Setting
DANKA AUSTRALIA PTY. LTD.
Adjustment of paper buckle in front of Timing Roller for Tray
No.2
Range: 0 to 99 (0.0 mm to 9.9 mm)
Unit:
1 (0.1 mm)
Default: 18 (1.8 mm)
Selects the tray for feeding paper during test-mode master
making and printing.
Range : 0: Standard Tray
Default : 0: Standard Tray
Sets the Tray-1 paper feed clutch ON timing against drum
angle.
Range:
-300 to +300 (-30 degrees to +30 degrees)
Unit:
1 (0.1 degrees)
Default: 0 (0 degrees)
Sets the Tray-2 paper feed clutch ON timing against drum
angle.
Range:
-300 to +300 (-30 degrees to +30 degrees)
Unit:
1 (0.1 degrees)
Default: 0 (0 degrees)
Sets the Assist Feed start timing for the MTPF Trays (during
the 2nd paper feed)
Range:
-128 to +127 (-12.8 degrees to +12.7 degrees)
Unit:
1 (0.1 degrees)
Default: 0 (0 degrees)
Sets the Multi-Tray Assist Feed Speed during print speed
No.1.
Range:
80 to 120 (80% to 120%)
Unit:
1 (1%)
Default: 105 (105%)
Sets the Multi-Tray Assist Feed Speed during print speed
No.2.
Range:
80 to 120 (80% to 120%)
Unit:
1 (1%)
Default: 105 (105%)
Sets the Multi-Tray Assist Feed Speed during print speed
No.3.
Range:
80 to 120 (80% to 120%)
Unit:
1 (1%)
Default: 105 (105%)
Sets the Multi-Tray Assist Feed Speed during print speed
No.4.
Range:
80 to 120 (80% to 120%)
Unit:
1 (1%)
Default: 105 (105%)
Sets the Multi-Tray Assist Feed Speed during print speed
No.5.
Range:
80 to 120 (80% to 120%)
Unit:
1 (1%)
Default: 105 (105%)
ON or OFF selection of drag multi-feed detection by FL Multi
Tray-1 pickup sensor.
Range: 0: OFF
1: ON (default)
[ 17 - 35 ] - Rev. 0.2
CHAPTER 17: TEST MODE
1: Tray-1
2: Tray-2
x
x
o
x
x o
x
x
o
x
x o
x
x
o
x
x o
x
x
o
x
x o
x
x
o
x
x o
x
x
o
RZ9 Series
Advertisement
Chapters
