Advertisement
CHAPTER 17: TEST MODE
5. Master-Making / Master-Disposal Test Mode
No.
Sensor switch check
Master-positioning sensor
0400
Master detection sensor
0401
0402
Master end sensor
Cutter HP SW [Shuttle blade cutter]
0403
Cutter HP SW [Rotary cutter]
Cutter Stop Position SW [Shuttle
0404
blade cutter]
TPH pressure sensor
0406
0407
Master-making-unit set sensor
0408
Master-making-unit lock sensor
Master-making-unit safety SW
0409
0410
Master-making-unit releasing button
0420
Master-disposal Jam Sensor
0421
Master-compression HP Sensor
Master-disposal BOX safety SW
0423
Master-compression motor FG
0425
sensor
0426
Master-removal motor FG sensor
No.
Motor, solenoid
0460
Thermal-pressure motor (CW)
0461
Thermal-pressure motor (CCW)
0462
Write pulse motor in feed direction
0463
Write pulse motor in return direction
0464
Load pulse motor in feed direction
Write pulse motor + Load pulse
0466
motor in feed direction
Master-making-unit release button
0467
LED
Master removal motor in feed
0470
direction
No.
Cutter motor 1 cycle motion
0480
Performs one cutting motion.
Thermal pressure motor action (TPH down)
0481
Pushes the TPH down.
Thermal pressure motor action (TPH up)
0482
Pushes the TPH up
Master-making-unit Lock Solenoid ON/OFF action
0488
Press "Start" key to switch ON the Solenoid. Solenoid automatically switches OFF 10 sec.
Storage fan solenoid ON/OFF action
0489
Press START key to switch ON the Solenoid. Solenoid automatically switches OFF 10 sec.
later.
Master compression-plate home positioning
0490
Moves master compression plate to the home position.
M.-Compress. Protect Position
0491
Moves master compression plate to the Protection Mode position.
Master compression-plate continuous movement
0493
Repeats disposal compression action with interval of 3 seconds between the each.
Cutter motor ON action (cut direction)
[This test mode is for checking the motor as one independent part. Disconnect the motor from the
0494
cutter unit before activation.]
Rotates the cutter motor in the cut direction (maximum 10 seconds)
DANKA AUSTRALIA PTY. LTD.
Sensor light reflected (Master present) / No reflection ( No
master)
Sensor light reflected (Master present) / No reflection ( No
master)
Sensor light blocked (Master end seal detected)
SW pressed (Cutter at HP)
SW not pressed (Cutter at HP)
SW pressed (Cutter at end position)
Sensor light blocked (TPH down position)
Sensor light blocked (Master-making unit cover closed)
Sensor light blocked (Master-making unit locked in position)
SW pressed (Master-making unit upper cover is closed).
Other safety switches must be ON for this check.
SW ON (Button is pressed )
Sensor light is not blocked (Master is detected - jammed)
Sensor light blocked (Master compression plate at HP)
SW ON (Master-Disposal Box is set in place).
Other safety switches must be ON for this check.
Sensor light blocked (Encoder disc is detected)
Sensor light blocked (Encoder disc is detected)
Rotates in clock-wise (CW) direction
Rotates in counter-clock-wise (CCW) direction
Rotates in master feeding direction
Rotates in master returning direction
Rotates in master feeding direction
Rotates both the Write & Load pulse motors in master feed
direction
LED illuminates.
Rotates in the direction to feed the removed master towards
the master disposal box.
Unit check
[ 17 - 12 ] - Rev. 0.2
Detection status
Remarks
3 5 9
o o o
o o o
o o o
o o
o
o o
x
o o o
o o o
o o o
o o o
o o o
o o o
o o o
o o o
o o o
o o o
3 5 9
o o o
o o o
o o o
o o o
o o o
o o o
o o o
o o o
3 5 9
o o o
o o
o
o o
o
o o
o
o o
o
o o
o
x
x
o
o o
o
o o
o
RZ9 Series
Advertisement
Chapters
