Advertisement
CHAPTER 16: PANEL MESSAGE
Error Type
D17 [Incorrect master roll]
D17-xxx
Description
Wrong-type Master Installed or Cannot Read Master Info
Replace Master Roll or Contact dealer/Riso office
To reset
Set correct master roll in the machine.
display
Error Point
236
Incorrect master roll.
237
Master roll RF-Tag not detected.
238
Master roll RF-Tag communication error. (Communication interrupted by noise)
239
Incorrect information on the Master roll RF-Tag.
241
Mismatch in the Master roll RF-Tag information.
256
Master roll RF-Tag software error.
Error Type
D18 [Print cylinder (drum) is ready for removal]
D18-xxx
Description
Print Cylinder (Drum) has been Unlocked
To reset
Pull out the print Cylinder (Drum).
display
Error Point
522
Print Cylinder (Drum) is unlocked for its removal. (Drum lock Solenoid is ON).
Error Type
D19 [Master making unit is ready for removal]
D19-xxx
Description
Master Making Unit has been Unlocked
To reset
Pull out the master making unit.
display
Error Point
223
Master making unit is unlocked for its removal. (Lock Solenoid is ON).
Error Type
D22 [Print cylinder (drum) removal command]
D22-xxx
Print Cylinder (Drum) Not Set in Place.
Description
Press Cylinder (Drum) Release Button and Pull Out Print Cylinder (Drum)
after the Button Lights.
To reset
Pull out print cylinder (drum) from the machine.
display
Error Point
540
Cannot access to the EEPROM on the print drum PCB.
542
Print drum PCB EEPROM data error.
Error Type
D32 [AF Cover Not Closed]
D23-xxx
Description
Close the AF Cover
To reset
Close the AF cover.
display
Error Point
177
The AF cover is opened.
DANKA AUSTRALIA PTY. LTD.
Error Conditions
Error Conditions
Error Conditions
Error Conditions
Error Conditions
[ 16 - 32 ] - Rev. 0.2
3
5
9
O O O
O O O
O O O
O O O
O O O
O O O
3
5
9
O O O
3
5
9
O O O
3
5
9
O O O
O O O
3
5
9
x
x O
RZ9 Series
Advertisement
Chapters
