Removing The Auto-Control Paper Receiving Tray - Riso RZ9 Series Technical Manual

CHAPTER 8: PAPER EJECTION SECTION

10. Removing the Auto-control Paper Receiving Tray

(1) Disconnect the connector for the bundled wires from the machine.
(2) Remove the front and rear side flanges (M4 x 6 ,1pc each).
(3) Remove the auto exit tray unit.
Auto exit tray unit
DANKA AUSTRALIA PTY. LTD.
connector
[ 8 - 24 ] - Rev. 0.2
Flange
0834
0833
RZ9 Series