Removing The Print Drum Safety Switch - Riso RN SERIES Technical Manual

3.

Removing the Print Drum Safety Switch

(1) Pull out the print drum.
(2) Remove the covers.
• Front door
• Front cover
(3) Remove the Print drum safety switch cover [B]. (M4 x 6: 2 pcs)
(4) Unplug the Connector [C], remove the mounting screws (M3 x 14: 2 pcs), and then remove the Print
drum safety switch [A].
A: Print drum safety switch
B: Print drum safety switch cover
C: Connector
A
B
RN (Version 1.0)
CHAPTER 3. MAIN DRIVE SECTION
REMOVING THE PRINT DRUM SAFETY SWITCH
3 – 9
B
A
C