Riso RZ9 Series Technical Manual page 439

Parameter value input
Message H1 [Ink color setting]
H1
Description
Select the same color as the Print Cylinder (Drum) currently in use.
To reset
Enter the required parameter value.
display
Message H2 [Print density fine adjustment]
H2
Description
Select a Print Density level to match the ink to fine-tune print result.
To reset
Enter the required parameter value.
display
Message H3 [First print density adjustment]
H3
Description
Select a Print Density level of the first print (proof-read copy) to match the ink.
To reset
Enter the required parameter value.
display
Message H4 [Master Density]
H4
Description
Select the standard density to be applied during master-making.
To reset
Enter the required parameter value.
display
Message H5 [Print density fine adjustment]
H5
Description
Select a Print Density level to match the master to fine-tune print result.
To reset
Enter the required parameter value.
display
Message H6 [First print density adjustment]
H6
Description
Select a Print Density level of the first print (proof-read copy) to match the master.
To reset
Enter the required parameter value.
display
DANKA AUSTRALIA PTY. LTD.
[ 16 - 43 ] - Rev. 0.2
CHAPTER 16: PANEL MESSAGE
RZ9 Series