Advertisement
2. Paper transport path
The rollers (pickup roller, paper feed rollers 1 through 3) in the paper transport section inside the base are driven
by the FL transfer motor.
The roller (paper feed roller 4) in the vertical transfer unit is driven by the FL multi feed tray pickup motor.
The rotation timing of each roller is controlled by a clutch. (The rollers indicated by black circles are driven via
a clutch.)
Paper transport status is detected by FL feed sensors 1 through 4.
The multi-tray 1 pickup sensor is provided in the paper transport path immediately after the pickup roller for feed
tray 1 only.
When A3 paper is supplied from the top tray, a minor multiple feed condition may result in the overlapping of the
end section of a sheet with the leading edge of the following sheet. The multi-tray 1 pickup sensor detects this
condition. (Detection occurs regardless of paper size.)
The Paper sensor detects multiple paper feeds from the multi-tray feed section, the same as it does for the
papers from the standard paper feed tray.
FL feed sensor 4
Paper feed roller 4
FL feed sensor 3
Paper feed roller 3
FL transfer motor
FL feed sensor 2
Paper feed roller 2
FL feed sensor 1
Paper feed roller 1
CHAPTER 5: MULTI-TRAY PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.
paper sensor
[ 5 - 3 ] - Rev. 0.2
FL multi feed tray pickup
motor
FL multi-tray 1 pickup
sensor
0502
RZ9 Series
Advertisement
Chapters
