Removing The Master Clamp Base Assembly - Riso RZ9 Series Technical Manual

CHAPTER 9: PRINT DRUM SECTION
DANKA AUSTRALIA PTY. LTD.

3. Removing the Master Clamp Base Assembly

(1) Make a confidential master on the print drum and pull out the drum from the machine.
(2) Remove screws (M3x6: 4pcs) and detach the master clamp base assembly from the print drum.
Clamp plate base assembly
0917
0918
0919
<< Clamp plate base assembly >>
0920
[ 9 - 11 ] - Rev. 0.2
RZ9 Series