Original Feeding And Transporting Mechanism - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 14: Duplex AF Unit

. Original Feeding and Transporting Mechanism

Original Setting

1) The original is set with the image facing up. The original pushes actuator and the original set sensor is

Original Feeding and Transporting

2) After pressing the start button, the pick-up solenoid is activated and the lift plate lifts the original up until it

comes in contact with the pick-up roller.

3) The feed motor feeds the separated original to the 1st transport roller at maximum spped.

4) When the registration sensor detects the leading edge of the original , the motor stops for a while.

5) Then the feed and transport motors turn on again , and feed the original through scanning area ata a lower

6) After scanning , the original is fed out by the 2nd transport roller and exit roller.

Paper Feed Belt

1st Transport Roller

Registration Sensor

DANKA AUSTRALIA PTY. LTD.

Original Set Sensor

Pick-Up Roller

[ 14 - 6 ] - Rev. 0.2

Separation roller

Scanning Area

2nd Transport roller

Pick-Up Solenoid