Advertisement
CHAPTER 4: FIRST PAPER FEED SECTION
(4) Remove the mounting screws (bind, M3 x 6, 7 pcs) and dismount paper feed tray table L.
Removing the paper size detection sensor/paper width potentiometer
(5) Unplug the connector and remove the paper size detection sensor.
Removing the paper width potentiometer
(5) Unplug the connector and remove the mounting screws (P tight, 3 x 8, 3 pcs). Dismount the paper width
potentiometer assembly.
Connector for paper width
potentiometer
Connector for paper size detection sensor
DANKA AUSTRALIA PTY. LTD.
0426
[ 4 - 16 ] - Rev. 0.2
0425
Paper width potentiometer
assembly
Paper size detection sensor
RZ9 Series
Advertisement
Chapters
