Riso RZ9 Series Technical Manual page 469

Drum Color Code Entry
Description Sets the print drum color information on the EEPROM of the Drum PCB.
1214
Setting
Scanner Adjustment (1)
Description Input the number imprinted on the sticker on the Scanner Unit.
1220
Range :
Setting Unit :
Default :
Scanner Adjustment (2)
Description Input the number imprinted on the sticker on the Scanner Unit.
1221
Range :
Setting Unit :
Default :
Scanner Adjustment (3)
Description Input the number imprinted on the sticker on the Scanner Unit.
1222
Range :
Setting Unit :
Default :
Scanner Adjustment (4)
Description Input the number imprinted on the sticker on the Scanner Unit.
Range :
Unit :
Default :
1223
Setting
Note:
The input number changes to another number after the test mode is activated.
Use the newly displayed value from the next Offset adjustment for that one
particular scanner unit.
Scanner Adjustment (5)
Description Input the number imprinted on the sticker on the Scanner Unit.
Range :
Unit :
Default :
1224
Setting
Note:
The input number changes to another number after the test mode is activated.
Use the newly displayed value from the next Gain adjustment for that one
particular scanner unit.
RLP Mode Enable Control
Description Activates or deactivates the RLP feature.
1229
0 : Disabled (default)
Setting
1: Enabled
DANKA AUSTRALIA PTY. LTD.
0: Not Specified ( default)
1: Black
2: Blue
3: Medium Blue
4: Red
5: Bright Red
6: Riso Federal Blue
7: Purple
8: Riso Marine Red
9: Burgundy
10: Green
11: Teal
12: Brown
Sub-Scanning
68 to 188
1
128
Main-Scanning
92 to 164
1
128
Sub-Scanning Ratio
0 to 100
1
50
Offset
0 to 255
1
128
Gain
0 to 255
1
128
[ 17 - 27 ] - Rev. 0.2
CHAPTER 17: TEST MODE
13: Yellow
14: Light Gray
15: Gray
16: Flourescence Pink
17: Flourescence Orange
18: Orange
19: Flat Gold
20: Hunter Green
21: Crimson
30: Custom
31: Order (with specified paper)
32: Order (without specified paper)
63: Any Color
o o o
o o o
o o o
o o o
o o o
o o o
o o o
RZ9 Series