Download Print this page

Auto-Control Paper Receiving Tray Mechanism - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

Advertisement

5. Auto-control paper Receiving Tray Mechanism

After printing, paper is discharged into the V-shaped paper receiving tray. The paper exit section features the
following mechanisms for neat stacking of discharged sheets.
Exit paper fence
Two paper guides and one paper stopper position discharge paper at the correct position.
These three exit paper fences feature an automatic slide function to adjust their positions to match the size of
the paper in use.
The exit paper stopper cushion on the paper stopper keeps discharged paper from bouncing.
Paper-settling plate
The exit paper fences on both sides are provided with a total of four paper setting plates on the inside surfaces.
These plates move slightly due to the weight of discharged paper, giving the paper a slight upward curl so that
they stack neatly on the paper receiving tray.
The paper-settling plates can be stowed away by operating the plate knobs.
Paper fence HP button
Pressing the paper fence HP button moves the paper guide fences to their preset positions.
If there is no printed paper on the paper receiving tray, the paper stopper and paper guides retract to their
stowage positions. If printed paper is found in the tray, the paper stopper and paper guides slide out wide to
allow the papers on the tray to be removed easily. By user mode, the operator can enter settings so that only
the paper stopper, only the paper guides, or both paper stopper and paper guides move.
Exit tray paper detection sensor
The sensor checks whether paper printed in the previous print job remains in the exit tray, then controls
operation of the paper exit fences before starting a new print job.
Damper mechanism
Since the exit tray is heavy, the exit tray support sections on both sides are provided with dampers to open the
tray slowly and minimize the impact when the tray is opened from the stowed condition.
Paper-settling
plate
Damper
Exit tray paper
detection sensor
DANKA AUSTRALIA PTY. LTD.
Paper guide
[ 8 - 7 ] - Rev. 0.2
CHAPTER 8: PAPER EJECTION SECTION
Paper stopper
Paper fence HP button
Exit paper stopper
cushion
Paper-settling
plate knob
0810
RZ9 Series

Advertisement

loading

This manual is also suitable for:

Rv9 series