CHAPTER 5: MULTI-TRAY PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.
(11) Detach the guide plate stay on the operator side of the machine (front) by removing screws (M4x8; 2 pcs).
(12)The vertical tansfer unit is hooked at the top. Lift it a little bit to unhook the hook, and then remove it from
the machine out through the opening above the paper feed tray.
0544
Guide plate stay
Vertical transfer unit
[ 5 - 23 ] - Rev. 0.2
RZ9 Series