Advertisement
CHAPTER 11: MASTER REMOVAL SECTION
10.Removing the Master Compression Plate
(1) Switch off the machine power and detach the master removal unit.
(2) Detach the compression gear cover and spur gear to lower the master compression plate.
(3) Remove an E-ring and metal bushing from the rear of the unit.
(4) Remove a screw (M4x8: 1pc) from the front of the unit and detach the compression gear.
(5) Remove an E-ring and metal bushing from the front of the unit and detach the master compression plate.
< REAR >
< Master Compression Plate >
DANKA AUSTRALIA PTY. LTD.
Master compression plate
Compression gear
1142
1145
[ 11 - 18 ] - Rev. 0.2
1141
< FRONT >
1143
1144
RZ9 Series
Advertisement
Chapters
