7. Removing the FB/AF HP Sensor
(1) Switch off the machine power and remove the scanner cover;paper feed.
(2) Detach the FB/AF HP sensor, together with the sensor bracket, from the scanner unit by removing screw
(M3x6: 1pc), and disconnect the connector to the sensor.
(3) Disengage the claws on the FB/AF HP sensor from the sensor bracket to remove the sensor.
For the machines with the duplex AF unit, the metal cover shown on the photograph at the bottom of the
page needs to be removed first.
CHAPTER 12: FB ORIGINAL SCANNING SECTION
DANKA AUSTRALIA PTY. LTD.
[ 12 - 13 ] - Rev. 0.2
Sensor bracket
Connector
1219
Metal cover
For the machines with the
duplex AF unit, this metal
cover needs to be removed
first.
1220
RZ9 Series