Advertisement
CHAPTER 8: PAPER EJECTION SECTION
8. Removing the Separator
(1) Switch off the machine power and remove the following components.
-
Paper receiving tray
-
Separation fan unit
(2) Pinch the power-band, slide it away from the separator, and pull the air-hose off the separator.
(3) Remove the cap screws (M3x10: 2pcs) and detach the separator from the shaft.
< Precaution in reassembly >
The pinch knobs on the power-band should face towards you, as shown on the photograph when mounting it on
the air-hose.
Separator
DANKA AUSTRALIA PTY. LTD.
Power-band
[ 8 - 22 ] - Rev. 0.2
0831
Air-hose
RZ9 Series
Advertisement
Chapters
