13. Removing the Cutter Guide Assembly
(1) Pull out the master making unit and switch off the machine power.
(2) Open the master making unit upper cover and remove following items.
-
Master roll
-
master making cover front
-
Write pulse motor assembly
-
Load pulse motor assembly
-
Cutter cover assembly
-
Master loading guide
-
Clamping guide roller
(3) Detach the cutter guide assembly by removing screws (M3x6: 2pcs).
1556
1557
DANKA AUSTRALIA PTY. LTD.
< Cutter guide assembly >
[ 15 - 25 ] - Rev. 0.2
CHAPTER 15: MASTER MAKING SECTION
Cutter guide assembly
RZ9 Series