CHAPTER 15: MASTER MAKING SECTION
Removing the master making U safety SW
(5) Unplug the connectors (2 locations), remove a screw (M4x8: 1pc) and detach the master making U safety
SW assembly.
(6) Unhook the torsion spring, remove an E-ring and detach the master making U safety SW together with the
bracket. Remove the switch from the bracket.
DANKA AUSTRALIA PTY. LTD.
Master making U Safety SW assembly
E ring
Torsion spring
[ 15 - 10 ] - Rev. 0.2
1517
Master making U Safety SW
1518
RZ9 Series