Removing The Original Pickup Asembly - Riso RZ9 Series Technical Manual

CHAPTER 13: Simplex AF Unit
Removal and Assembly

1. Removing the Original Pickup Asembly

(1) Remove the top cover by loosening the screws (M4 x 6: 3 pcs) on the front of the top cover and removing
the screws (4 x 10: 2 pcs) from the rear.
(2) Disconnect the two connectors and the reusable band, remove the screws (M3 x 4: 2 pcs), and detach the
sensor-bracket assembly.
DANKA AUSTRALIA PTY. LTD.
Top cover
Reusable band
[ 13 - 8 ] - Rev. 0.2
1306
1307
Sensor-bracket assembly
RZ9 Series