Mechanism; Clamp Unit Home Positioning Mechanism - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 10: CLAMP UNIT

Mechanism

The clamp unit is checked if the unit is at home position or not each time the machine power is turned ON or

the all-reset key is pressed.

The unit is judged to be at home position when the clamp sensor-A is detecting the clamp opening cam (the

clamp opening cam is at the maximum up position) and the clamp sensor-B is not detecting the actuator disc.

If the unit is not at the home position when the power is turned ON or all-reset key is pressed, the clamp motor

is activated to rotate the clamp cam is rotated to bring the position-A compensation plate and clamp opening

cam to the home position.

Position-A compensation plate

Clamp opening cam

DANKA AUSTRALIA PTY. LTD.

Clamp sensor-A

Clamp sensor-B

[ 10 - 2 ] - Rev. 0.2