Paper Feed Pressure Adjustment Mechanism - Riso RZ9 Series Technical Manual

CHAPTER 4: FIRST PAPER FEED SECTION
DANKA AUSTRALIA PTY. LTD.

5. Paper Feed Pressure Adjustment Mechanism

The paper feed pressure lever is located on the left-hand side of the first paper feed stay assembly.
Switching this lever either to the right or to the left adjusts the paper feed pressure (scraper pressure) between
<Normal> (low) and <Card> (high).
Setting the paper feed pressure lever to the right for <Card> increases paper feed pressure (scraper pressure).
The paper feed pressure sensor checks the position of the paper feed pressure lever and switches the paper
feed clutch OFF angle, switches the paper feed reverse-rotation prevention solenoid ON-OFF, and adjusts the
paper wing position.
Paper feed pressure sensor
First paper feed stay assembly
0407
Pickup frame unit
Paper feed pressure lever
(scraper located within)
[ 4 - 7 ] - Rev. 0.2
RZ9 Series