Riso RZ9 Series Technical Manual page 436

CHAPTER 16: PANEL MESSAGE
Error Type F67 [Linked printer saddle stitching is disabled]
F67-xxx
Description !! Improper Paper for Rotation Sorting !!
Set Same Sized Paper in 2 Trays, One in Horizontal and Other in Vertical Direction
To reset
Press [Close] button.
display
Error Point
Specified size papers are not set in horizontal and vertical directions in the
963
linked printer tray, when printing from linked printer with rotation sorting selected.
F73 [Linked Printer - Auto Tray Selection Not Available with Selected Reproduction
Error Type
Ratio]
F73-xxx
Description Paper Size cannot be Defined by Specified Reproduction Size
Select Paper Tray and Press Start Key
To reset
Press [STOP] key.
display
Error Point
In Linked Printer printing, the detected original size does not match with the selected
975
reproduction size.
F74 [High Speed Printing - Printer Temperature is Too Low for 180 ppm High
Error Type
Speed Printing]
F74-xxx
Description Printer Temperature is Low
189 ppm is Not Available
To reset
Press [STOP] or [START] key.
display
Error Point
High speed printing was selected with the machine temperature below 15 degrees
980
Celcius.
Error Type F78 [Editor - Stage Cover is Opened]
F78-xxx
Description Close Stage Cover
If original moves you may not get desired result
To reset
Close the stage cover and press [CLOSE] button.
display
Error Point
731 The stage cover is opened during the digitizer operation.
Error Type F79 [Editor - No Original During Re-Scanning]
F79-xxx
Description Set Original and Press Start key
Re-scanning will be Started to Add Image Processing
To reset
Press [STOP] key
display
Error Point
732 The original was not detected during re-scanning.
Error Type F85 [External CI - Scanning Not Possible with External CI not Connected]
F85-xxx
!! Scanning is Not Possible !!
Description
External CI is not Connected or Processing Connection
Check Cable Connection
To reset
Press [CLOSE] button or press [START] key.
display
Error Point
995 Either the PS7R is not connected or improperly connect.
DANKA AUSTRALIA PTY. LTD.
Error Conditions
Error Conditions
Error Conditions
Error Conditions
Error Conditions
Error Conditions
[ 16 - 40 ] - Rev. 0.2
3 5 9
x O O
3 5 9
x x O
3 5 9
x x O
3 5 9
x x O
3 5 9
x x O
3 5 9
x x O
RZ9 Series