Options (Job-Separator) Test Mode; Options (Memory) Test Mode - Riso RZ9 Series Technical Manual

10. Options (Job-Separator) Test Mode

Sensors, switches
No.
3100 Job separator tape jam sensor
3101 Job separator tape detection
3102 Job separator power switch
3103 Job separator connection signal
No.
Tape output
3140
Outputs one tape.
No.
Stamping quantity
Description
3170
Setting
Activate or deactivate the tape jammed message
Description
3171
Setting

11. Options (Memory) Test Mode

No.
Storage Mem ory Com pos ition Change
3340
Proces sing for changing the card us ed by the RP to a configuration com patible with the
current m achine.
PS7R Status Print
3341
Prints out the PS7R status .
No. Data clear
Storage Mem ory Initialize (32M)
3355
Storage Mem ory Initialize (128M)
3356
Data check
No.
Storage Mem ory Inform ation
3361
DANKA AUSTRALIA PTY. LTD.
Jammed tape is detected
Tape is detected
Power is supplied to the Job separator
Job separator is connected
Sets number of times the stamper stamps per one tape cut.
0: No stamping (default)
1: One stamping
2: Two stamping
Activates or deactivates the Tape Jam message while using the Job Separator.
0: Does not show the jammed message.
1: Shows the jammed message. (default)
Initializes the s torage device to delete data from the 32M
s torage device or when an error related to s torage device
prevents data res toration.
Initializes the s torage device to delete data from the 128M
s torage device or when an error related to s torage device
prevents data res toration.
Dis plays the volum e label, capacity, area used, and available
s torage area.
[ 17 - 31 ] - Rev. 0.2
Detection status
Unit check
Data setting
Unit check
Details
Details
CHAPTER 17: TEST MODE
3 5 9
o o o
o o o
o o o
o o o
3 5 9
o o o
3 5 9
o o o
o o
3 5
x x o
x x o
3 5
x x o
x x o
3 5
x x o
RZ9 Series
o
9
9
9