Advertisement
CHAPTER 5: MULTI-TRAY PAPER FEED SECTION
3. Paper feed tray
The upper tray (paper feed tray 1) and the lower tray (paper feed tray 2) can hold 1,000 sheets of paper.
The two feed trays have identical structures.
The right and left paper guides on each feed tray are moved simultaneously by a connecting belt, and also have
a lock mechanism.
The paper stopper is set manually according to the paper size.
As with the standard paper feed tray, each feed tray is equipped with a paper width sensor and a paper size
detection sensor for automatic detection of paper size.
Similarly with the standard paper feed tray, each feed tray uses a paper detection sensor and a tray volume
sensor for detection.
Checking of the feed tray insertion
The feed tray insertion is checked by the electrical connection of the feed tray and by a safety switch.
When the safety switch is off, the FL multi feed tray pickup motor and FL transfer motor can not be drived.
Paper-Volume Detection Mechanism
The remaining volume of paper loaded on the table is determined by multi-feed tray volume sensor 1 and 2
(fixed on the table), and is displayed on the panel.
The actual position of the paper-feed tray is checked by a -sensor when it reaches the upper-limit position, and
the remaining-paper volume is detected. [Unable to detect] is displayed on the panel if the paper-feed tray is
not at the upper-limit position (the paper-feed-tray is pulled out).
DANKA AUSTRALIA PTY. LTD.
Sensor status
Sensor 1
Sensor 2
ON
ON
OFF
ON
OFF
OFF
ON
OFF
[ 5 - 4 ] - Rev. 0.2
Paper volume
detected
100-50%
50-30%
30-10%
10%
0561
RZ9 Series
Advertisement
Chapters
