Advertisement
CHAPTER 17: TEST MODE
Program Print Auto-Repeat Setting
Description
0161
Setting
RLP Default Tray Selection
Description
0164
Setting
RLP Mode display change timing selection
Description
0165
Setting
Maximum Print Quantity Control
Description
0166
Setting
Paper ID Auto-Repeat Control
Description
0167
Setting
Fine Adjustment Button Display Control
Description
0168
Setting
Admin. Display Control
Description
0169
Setting
Consumable Storage Indication
Description
0170
Setting
Machine Clock Setting (YEAR)
Description
0171
Setting
Machine Clock Setting (MONTH & DATE)
Description
0172
Setting
DANKA AUSTRALIA PTY. LTD.
Selection to keep the program printing active or to change to
inactive after one master-making with Auto-Print OFF.
0 : Change to inactive
1: Stays active ( default)
Selects the default tray on linked printer. (This selection is
effective against 1st linked printer. Tray No.1 is
automatically selected for 2nd linked printer and up.)
0: MP-tray, 1: Tray-1 (default), 2: Tray-2, 3: Tray-3, 4: Tray-4,
5: Tray-5,
6: Tray-6, 7: Tray-7, 8: Tray-8.
Timing adjustment for the display to change when using
RLP auto-selection mode.
-5 to +5 (0 second to 2.5 seconds) 1 = 0.25 seconds
0: 1.25 seconds (default)
Enable or disable the maximum maximum print quantity
setting, and also sets the maximum print quantity.
0 : Disabled (default)
1 = 1 print
Selects if the paper data stays active or become inactive after
power is turned OFF or RESET button is pressed.
0 : Stays active (default)
1: Changes to inactive
Used to display or hide the fine adjustment button.
0 : No display (default)
1: Displays
Slects if the Admin. Tab is displayed or not.
0 : Does not display
1: Displays (default)
Selects if the consumable storage indication is displayed on
the Admin. window.
0 : Does not display (default)
1: Displays
Sets YEAR in clock.
2000 to 2199 (Year 2000 to 2199)
1 = 1 year
Default: 2000 (Year 200)
Test Mode No. 0101 must be activated after inputting
test modes No. 0171 through No. 0173 to activate the
new setting.
Sets MONTH/DATE in clock.
Left 2 digits= MONTH: 1 to 12 (January to December)
Right 2 digits = DAY: 1 to 31 (Days 1 to 31)
1 = 1 month, 1 = 1 day
Default: 0101 (January 1)
Test Mode No. 0101 must be activated after inputting
test modes No. 0171 through No. 0173 to activate the
new setting.
[ 17 - 8 ] - Rev. 0.2
1 to 9999: Enabled
x
o
o
x
o
x
x
o
o
x
o
o
x
o
o
x
x
o
x
o
o
x
o
o
o
o
o
o
o
o
RZ9 Series
Advertisement
Chapters
