Auto-Adjustment Of Multiple Paper Feed Detection - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 6: SECOND PAPER FEED SECTION

4. Auto-adjustment of Multiple Paper Feed Detection

Adjustment procedure

(1) Place white sheet of paper, which the customer uses the most, on the standard paper feed tray.

(2) Go into test mode and activate test mode No.705 [Automatic multiple paper feed adjustment].

(3) The adjustment ends automatically with the panel message [END]. After confirming this message, press

the [C] key on the panel to keep the machine still in the test mode.

(4) Activate test mode No.722 and confirm that the panel display shows a number between 484 and 508 (496

plus/minus 12).

(5) If correct number is achieved, the adjustment is finished. Remove the paper out from the machine.

DANKA AUSTRALIA PTY. LTD.

[ 6 - 24 ] - Rev. 0.2