Replacing The Print Drum (Cylinder); Removing The Print Drum (Cylinder) - Riso 9450 User Manual

Replacing the Print Drum (Cylin-
der)
If you want to print in a different color, replace the
print drum (cylinder).
When you want to remove jammed paper inside this
machine, you can also remove the print drum (cylin-
der).
Caution
• Ink may be left on the area around the print drum
(cylinder) or the inside of this machine after the
print drum (cylinder) unit has been removed.
Take care not to smudge your hands or clothes
with the ink. Wash immediately with soap if you
get ink on your hands, etc.
• When you put your hands inside the main unit,
take care not to touch any protrusions or edges
of the metal plate. It may result in injury.
• Do not stand the print drum (cylinder) vertically.
Doing so may stain the floor, etc.
BUse the dedicated print drum (cylinder)
for this machine.
(A 168 "Optional Accessories")
BKeep the power on while removing or

replacing the print drum (cylinder).

BStore the replaced print drum (cylinder)
horizontally in the print drum (cylinder)
case.

Removing the print drum (cylinder)

1
Open the front door.
2
Check that the [Print Drum (Cylin-
der) Release Button] lamp is lit.
If the lamp is off, press [Print Drum (Cylinder)
Release Button] to light it up.
Print Cylinder
Release Button
Chapter 9 Replacing Consumables
BWhen the master making unit is
pulled out, you cannot pull out the
print drum (cylinder). Return the
master making unit to its original
position, and then press [Print Drum
(Cylinder) Release Button].
3
Pull out the print drum (cylinder).
Pull out the print drum (cylinder) slowly as far
as it will go while grasping the print drum (cylin-
der) handle.
Print drum (cylinder)
handle
4
Remove the print drum (cylinder).
Use both hands to lift the print drum (cylinder)
straight up and remove it from the rail. Firmly
grasp the blue handle section.
BDo not touch the connector on
the print drum (cylinder). Neglect-
ing this may result in a malfunc-
tion of the print drum (cylinder)
because of static electricity or
other factors.
139
9