Advertisement
6. Paper-Feeding / Paper-Ejection Test Mode
No.
Sensors, switches
0600 Paper detection sensor
0601 Paper-size detection sensor
Elevator upper-limit sensor A [Only
0602
for RZ3 series]
0603 Elevator upper-limit sensor B
0604 Elevator lower-limit sensor
Paper sensor(RZ3/5)
0605
Paper sensor(RZ9)
0606 Paper-ejection sensor
0607 Paper-feed-tray upper safety SW
0608 Paper-feed-tray lower safety SW
0609 Paper-feed tray elevation button
0610 Remaining Paper Volume Sensor A Sensor light blocked (blocked by shield plate)
0611 Remaining Paper Volume Sensor B Sensor light blocked (blocked by shield plate)
0612 Paper-ejection FG sensor
0614 Paper-feed pressure sensor
0618 Paper ejection wing HP sensor
No.
Motor solenoid system
0660 Paper ejection motor
0661 Suction fan
0662 Separation fan
Paper ejection wing pulse motor
0666
(CW)
Paper ejection wing pulse motor
0667
(CCW)
0668 Feed Tray Button LED
0669 Pre-Suction fan
No.
Paper ejection fans action
0680
Turns ON the Separation Fan, Suction Fan, and Pre-Suction Fan by pressing START key.
Paper feed tray maximum up positioning
0681
Raises the paper feed tray to the maximum up position by pressing START key.
Paper feed tray elevation up & down
0682
Raises and lowers the paper-feed tray repeatedly
Paper feed tray maximum down positioning
0683
Lowers the paper feed tray to the maximum down position by pressing by pressing START
key.
Separation Pump Solenoid ON/OFF Action
0684
Turns the solenoid ON when the Start key is pressed. The solenoid automatically switches
OFF after 10 seconds.
Paper Feed Reverse-rotation Solenoid ON/OFF Action
0687
Turns the solenoid ON when the Start key is pressed. The solenoid automatically switches
OFF after 10 seconds.
Paper-feed clutch ON/OFF action
0688
Presses START key to turn ON the clutch. The clutch automatically switches off after 10
seconds.
DANKA AUSTRALIA PTY. LTD.
Sensor light reflected (paper detected)
Sensor light reflected (paper detected)
Sensor light blocked (Sensor A detecting paper feed tray at
maximum up position)
Sensor light blocked (Sensor B detecting paper feed tray at
maximum up position)
Sensor light blocked (Sensor detecting paper feed tray at
maximum down position)
Sensor light reflected (paper detected)
Sensor light blocked (paper detected)
Sensor light reflected (paper detected)
The switch is pressed
The paper feed tray upper safety SW must beON during this
procedure.
The switch is pressed
The paper feed tray lower safety SW must beON during this
procedure.
Switch ON (button is pressed)
Sensor light blocked (detecting encoder disc)
Sensor light blocked (detecting paper feed pressure lever)
Sensor light blocked (detecting actuator plate of the ejection
wing)
Rotates the motor.
Activates the fan.
Activates the fan.
Rotates the pulse motor in clockwise direction.
Rotates the pulse motor in counter-clockwise direction.
Feed Tray Button LED
Activates the fan.
Unit check
[ 17 - 15 ] - Rev. 0.2
CHAPTER 17: TEST MODE
Detection status
Remarks
3 5 9
o o o
o o o
o o o
o o o
o o o
o o
x
x
x o
o o o
o o o
o o o
o o o
x
x o
x
x o
o o o
o o o
x o o
3 5 9
o o o
o o o
o o o
x o o
x o o
x
x o
x
x o
3 5 9
x
x o
o o
o
o o o
o o
o
x
x
o
x
x
o
o o
o
RZ9 Series
Advertisement
Chapters
