Clear Counters; Clear Igmpsnooping; Clear Pass; Enable Passwd - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

clear counters

This command clears the stats for a specified <slot/port>or for all the ports or for the entire switch
based upon the argument.
Format
Mode

clear igmpsnooping

This command clears the tables managed by the IGMP Snooping function and will attempt to
delete these entries from the Multicast Forwarding Database.
Format
Mode

clear pass

This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
Format
Mode

enable passwd

This command changes the Privileged EXEC password. First type the command then hit the enter
or the return key.
Format
Mode

clear port-channel

This command clears all port-channels (LAGs).
Format
Switching Commands
Privileged EXEC
clear counters {<slot/port> | all}
Privileged EXEC
clear igmpsnooping
Privileged EXEC
clear pass
Privileged EXEC
enable passwd
Privileged EXEC
clear port-channel
202-10102-01, May 2005
8-61