Debug Ip Igmp Packet; Debug Ip Mcache Packet - NETGEAR ProSafe GSM7228PS Cli Manual

no debug ip dvmrp packet
Use this command to disable debug tracing of DVMRP packet reception and transmission.
Format
no debug ip dvmrp packet [receive|transmit]
Mode Privileged EXEC

debug ip igmp packet

Use this command to trace IGMP packet reception and transmission. receive traces only received
IGMP packets and transmit traces only transmitted IGMP packets. When neither keyword is used
in the command, then all IGMP packet traces are dumped. Vital information such as source
address, destination address, control packet type, packet length, and the interface on which the
packet is received or transmitted is displayed on the console.
Default disabled
Format
debug ip igmp packet [receive|transmit]
Mode Privileged EXEC
no debug ip igmp packet
Use this command to disable debug tracing of IGMP packet reception and transmission.
Format
no debug ip igmp packet [receive|transmit]
Mode Privileged EXEC

debug ip mcache packet

Use this command for tracing MDATA packet reception and transmission. receive traces only
received data packets and transmit traces only transmitted data packets. When neither keyword is
used in the command, then all data packet traces are dumped. Vital information such as source
address, destination address, packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
Default disabled
Utility Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
7-68