Ip Igmp Mrouter; Ip Igmp Mrouter Interface - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
15.1.5.1 no ip igmpsnooping mcrtexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for
the system, on a particular interface or a VLAN.
Format
Modes

15.1.6 ip igmp mrouter

This command configures the interface to only forward the snooped IGMP packets that
come from VLAN ID (<
The command is not needed most of the time since the switch will automatically detect the
presence of a multicast router and forward IGMP packets accordingly. It is only needed
when you want to make sure that the multicast router always receives IGMP packets from
the switch in a complex network.
Default
Format
Mode
15.1.6.1 no ip igmp mrouter
This command disables the forwarding of IGMP packets to this interface.
Format
Mode

15.1.7 ip igmp mrouter interface

This command configures the interface as the one the multicast router is attached to. All
IGMP packets snooped by the switch will be forwarded to the multicast router reachable
from this interface. The command is not needed most of the time since the switch will
automatically detect the presence of multicast router and forward IGMP packet
accordingly. It is only needed when you want to make sure the multicast router always
receives IGMP packets from the switch in a complex network.
Default
Format
Mode
IGMP Snooping Commands
no ip igmpsnooping mcrtexpiretime <vlanId>
Global Config
Interface Config
>) to the multicast router mode attached to this interface.
vlanId
Disabled
ip igmp mrouter <vlanId>
Interface Config
no ip igmp mrouter <vlanId>
Interface Config
Disabled
ip igmp mrouter interface
Interface Config
v1.0, November 2007
15-5