Show Ip Ospf Interface Brief - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Authentication
Type
The information below will only be displayed if OSPF is enabled.
OSPF Interface
Type
State
Designated
Router
Backup
Designated
Router
Number of Link
Events
Metric Cost

14.6.44 show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
Format
Modes
Interface
OSPF Admin
Mode
OSPF Area ID
Router Priority
Hello Interval
Dead Interval
14-52
The OSPF Authentication Type for the specified interface
are: none, simple, and encrypt.
Broadcast LANs, such as Ethernet and IEEE 802.5, take the
value . The OSPF Interface Type will be 'broadcast'.
broadcast
The OSPF Interface States are: down, loopback, waiting,
point-to-point, designated router, and backup designated
router.
The router ID representing the designated router.
The router ID representing the backup designated router.
The number of link events.
The cost of the OSPF interface.
show ip ospf interface brief
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
States whether OSPF is enabled or disabled on a router inter-
face.
Represents the OSPF Area Id for the specified interface.
A number representing the OSPF Priority for the specified
interface.
A number representing the OSPF Hello Interval for the speci-
fied interface.
A number representing the OSPF Dead Interval for the speci-
fied interface.
v1.0, March 2006
Routing Commands