Show Ip Ospf Interface Brief - NETGEAR 7300 Series User Manual

Layer 3 managed switch software
Hide thumbs Also See for 7300 Series:
Table of Contents

Advertisement

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Router Priority
Retransmit Interval
Hello Interval
Dead Interval
LSA Ack Interval
Transit Delay Interval
Authentication Type
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type
State
Designated Router
Backup Designated Router Is the router ID representing the backup designated router.
Number of Link Events The number of link events.
Metric Cost

show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables. This
command takes no options.
Format
Mode
Slot/Port
Is the unit slot/port identifying each interface.
OSPF Admin Mode
Routing Commands
A number representing the OSPF Priority for the specified inter-
face. This is a configured value.
A number representing the OSPF Retransmit Interval for the
specified interface. This is a configured value.
A number representing the OSPF Hello Interval for the specified
interface. This is a configured value.
A number representing the OSPF Dead Interval for the specified
interface. This is a configured value.
A number representing the OSPF LSA Acknowledgement Inter-
val for the specified interface.
A number representing the OSPF Transit Delay for the specified
interface. This is a configured value.
The OSPF Authentication Type for the specified interface are:
none, simple, and encrypt. This is a configured value.
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value
'broadcast'. The OSPF Interface Type will be 'broadcast'.
The OSPF Interface States are: down, loopback, waiting, point-
to-point, designated router, and backup designated router. This is
the state of the OSPF interface.
Is the router ID representing the designated router.
Is the cost of the ospf interface. This is a configured value.
show ip ospf interface brief
Privileged EXEC and User EXEC
States whether OSPF is enabled or disabled on a router interface.
This is a configured value.
202-10009-01_060204
9-43

Advertisement

Table of Contents
loading

Table of Contents