Area Stub; Area Stub Summarylsa - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.6.12.1 no area range
This command deletes a specified area range.
Format
Mode

14.6.13 area stub

This command creates a stub area for the specified area ID. A stub area is characterized by
the fact that AS External LSAs are not propagated into the area. Removing AS External
LSAs and Summary LSAs can significantly reduce the link state database of routers
within the stub area.
Format
Mode
14.6.13.1 no area stub
This command deletes a stub area for the specified area ID.
Format
Mode

14.6.14 area stub summarylsa

This command configures the Summary LSA mode for the stub area identified by
. The Summary LSA mode is configured as enabled.
<areaid>
Default
Format
Mode
14.6.14.1 no area stub summarylsa
This command configures the default Summary LSA mode for the stub area identified by
.
<areaid>
Format
Mode
Routing Commands
no area <areaid> range <ipaddr> <subnetmask>
Router OSPF Config
area <areaid> stub
Router OSPF Config
no area <areaid> stub
Router OSPF Config
disabled
area <areaid> stub summarylsa
Router OSPF Config
no area <areaid> stub summarylsa
Router OSPF Config
v1.0, March 2006
14-35