Property Tab - Ip Config - ICP DAS USA WP-2000-CE7 Series User Manual

3.1.5. Property Tab – IP Config
The IP Config tab provides functions to configure either DHCP (Roaming) or manually configured (Static)
network settings and to monitor the MAC address. Generally, DHCP is the default settings, but if you
don't have a DHCP server, you must configure the network settings by using manual configuration.
The tab use to
Set the network
settings
WP-2000-CE7 Series (WinCE7 Based) User Manual
How to use
Use DHCP to get IP address:
Select the Use DHCP to get IP address option, and then click the Apply
button.
Assign an IP address:
Select the Assign IP address option, and then click the Apply button.
v 1.0.4 Page: 48