Figure 10-67：Delay Action Setting Page - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
Follow the steps below:
i In the "Action" field, set the delay time (unit: second) before the
execution of next actions. The counting of the delay time would start
when the previous action starts, rather than when the previous action
is done.
ii Specify the "Execution Frequency" to be "One Time" or "Repeat".
Please refer to
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
http://wise.icpdas.com
Figure 10-67：Delay action setting page
"10.2 THEN/ELSE Action
Setting" for detail.
258