Data Exchange: Ebus; Detect Hot-Swap I-87K (High Profile) I/O Status - ICP DAS USA ISaGRAF WinCE ViewPAC User Manual

1.23 Data Exchange: Ebus


Ebus ( Ethernet Network)
Each ISaGRAF PAC can use its Ethernet port to talk to each other via the Ebus communication
mechanism. When PC is talking with controllers via Ethernet, the controllers can also talk to each
other via the same Ethernet; It makes the configuration more flexible and faster.

Note: The XP-8xx7-CE6, XP-8xx7-Atom-CE6, WP-8xx7 and VP-2xW7/4xx7 don't support Fbus.

1.24 Detect Hot-Swap I-87K (High Profile) I/O Status


In ISaGRAF Workbench, you must connect the I/O board to the "I/O connection" windows correctly
and select the "io_state" board then you can observe the I/O status. When you Hot-Swap the I-87K
(High Profile) I/O, the message will show on the front panel of ISaGRAF PAC.
1-14
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS