Table of Contents
Advertisement
ICP DAS WISE User Manual
iv Please select the timing to send back the data of I/O Data Table.
There are two options for the "Data Update Model", one option is
to send out the data when the I/O channel data change takes place,
the other is to send out the data at periodic time schedule. The two
options can be enabled concurrently.
Please note. If the "Data Update Model" you select is "I/O channel
data change takes place", please remember to input the variation
value. It mean if the Analog I/O channel data change takes place,
and exceed the variation value, then WISE will send back the data
of I/O Data Table. This setting will be helpful to avoid signal
oscillation that may result in instability to the status changes and
let WISE send the data of I/O Data Table too frequently.
v In the "Start Address" field, set up the start address which the
receiver (SCADA software) will use to save the data of I/O Data
Table from WISE.
vi After you finish the "Active I/O sending" settings, click "Save"
button to save the settings.
9.10 Channel Status Setting
Channel Status function offers all WISE login account an easy way to view
monitoring page that allows users to view important controller information
(Internal Register value, I/O module list and I/O channel value) in real time
without SCADA software. In addition, the Administrator login account can
update the value of Internal Register or I/O output channel (DO/AO/Coil
Output/Holding Register) by the interface WISE provide.
In order to let users browse the I/O channel value in a flexible and efficient
way, WISE provide two I/O value display interfaces as below.
Default Channel Status page: It displays all I/O channel status based
on the sorting of all I/O Module (Default style).
User-defined Channel Status page: It displays the I/O channel status
based on the user-defined arrangement.
The settings steps for User-defined Channel Status page are as below:
Click on "Add new Channel Status page" to add the new Channel
i
Status page which will be used to display the I/O channel data.
http://wise.icpdas.com
199
Advertisement
Table of Contents
