Table of Contents
Advertisement
4.4 Device parameter
There are 2 pages in "Device parameter" window. They are "Phone/Time
Report/Alarm" and "DI Type/Text Message" pages.
After configuring the 2 pages, press "Write to Device" button to save these
settings to GT-530. Then, reset GT-530 to enable these settings.
The "Read Form Device" button can help users to read back these settings from
GT-530. In addition, these setting would be read from GT-530 when the "Main
Parameter" window pops up from the main menu.
4.4.1
Phone /Periodic report/Alarm
The following page is "Phone/Periodic Report/Alarm". Users can refer
the explanation below：
1.
Machine ID
The device ID would be shown in the report and alarm SMS messages. It
can be used for recognizing the GT-530. The length of characters is 20
without supporting unicode and ";" characteristic.
2.
SIM Card Number
This text field can show or input the phone number of the plug-in SIM card.
Take Taiwan for example: 0928xxxxxx.
3.
1~ 10 Phone umbers
This field is used to set which phone numbers to receive SMS message or
send SMS command. Every phone number can be set the authority as
follows.
GT-530 User Manual, Version 1.0, August 2009
GT-530 user manual v1.0
24/48
Advertisement
Table of Contents
